• Description / Specification
• Order sample / quote

• Made from polyethylene (Ld-PE) (03)
• Colours yellow and red
• For grease nipple caps according to DIN 71412 and NEN 2435
• Protects against dirt, damage and marks greasing ponts
• For large packaging and larger numbers , see article series 987 (only in red available)

Dimensions
A	6
B	30
C
D
E
F
Basic info
Material	Polyethylene (Ld-PE)
Color	red

---

Colour: Colour number: red 005 XXX XXXX XXXXX Colour definition : traffic red Matches : Reasonably matches RAL colour 3020. Featured colours reserved. Due to the screen differences in colour may occur. Material: Material number: Polyethylene (Ld-Pe) 03 XXX XXXX XXXXX Product information Low density polyethylene is resistant to many chemicals. Therefore especially suitable for coverplugs and caps. Because of great flexibility it is almost unbreakable. Does not take in moisture and therefore very suitable for electrical insulation. Polyethylene can not be glued, burns after lighting it and may discolour and becomes brittle after exposure to direct sunlight. Physical information Property Value DIN Relative density (gr/cm³) 0.92 -- Tensile strength (MN/m²) 10 53455 Elongation at break (%) 300 53455 Tensile modulus (MN/m²) 180 53457 Notched impact strength (kJ/m²) -- 53453 Ball indentation (MN/m²) 14 53456 Application temperature (max ºC) 70 -- Volume resistivity (Ohm.cm) 10^17 53482 Dissapation factor tan. (10³ Hz) 0.0003 53483 Dielectric strength (MV/m) 60 53481 Coefficient of friction (on steel) (--) 0.17-1.5 -- Chemical resistance Resistant to   Petrol A Benzene A Mineral oils A Vegetable oils A Weak alkalis A Strong alkalis A Weak acids A Strong acids B   A = Good   B = Doubtful   C = Poor All information is given in good faith but without warranty

---

Name:

E-mail:

Phone:

SKU:

Comment:

Grease nipple cap [087] (087063000503)

• Product Code: 087063000503

• 0.1043€

• ---

• 250 or more 0.1043€
• 500 or more 0.0917€
• 1000 or more 0.0657€