• Made from Nylon-6 (PA-6) (01) or Elastomer (12)
  • Colour: black
  • Nylon model F1 is with soft EVA support base
  • Soft Elastomer model F2 has a maximum load of 1,5 kg each
  • Hard Elastomer/polypropylene model F3 has a max. load of 2,5 kg each
  • Suitable for damage protection and anti-sliding
Dimensions
A 17
B 7
C 11
D 1
E 2.5
F F1
Basic info
Material Nylon-6 (PA-6)
Color black

Colour: Colour number:
black699 XXX XXXX XXXXX

Colour definition : jet black
Matches: Reasonably matches RAL colour 9005
Featured colours reserved. Due to the screen differences in colour may occur.
Material:Material number:
Nylon-6 (PA-6)01 XXX XXXX XXXXX

Product information
A strong, tough and durable material. Suitable for connecting elements and other technical components. Thanks to self lubricant properties ideal for slide bearings. Always has to acclimatize for a few days after injection moulding, taking approximately 3% moisture to obtain its normal strenght. Operational temperature can go up to 100-120°C temporarily for non-critical parts. Many nylons are self extinguishing.

Physical information
PropertyValueDIN
Relative density (gr/cm³)1.14--
Tensile strength (MN/m²)5553455
Elongation at break (%)25053455
Tensile modulus (MN/m²)95053457
Notched impact strength (kJ/m²)3553453
Ball indentation (MN/m²)8253456
Application temperature (max ºC)120--
Volume resistivity (Ohm.cm)10^1553482
Dissapation factor tan. (10³ Hz)0.253483
Dielectric strength (MV/m)3553481
Coefficient of friction (on steel) (--)0.3--
Chemical resistance
Resistant to 
PetrolA
BenzeneA
Mineral oilsA
Vegetable oilsA
Weak alkalisA
Strong alkalisB
Weak acidsB
Strong acidsC

  A = Good
  B = Doubtful
  C = Poor

All information is given in good faith but without warranty


Insert foot [120] (120111769901)

  • Product Code: 120111769901
  • 1.5365€


  • 50 or more 1.5365€
  • 250 or more 1.0791€
  • 1000 or more 0.8704€

This product has a minimum quantity of 50

Discount:

  • from 275€: 10%
  • from 500€: 20%
  • from 1000€: 30%

Price valid until: 31. December, 2024.

Related Products

Part nr. Product name A B C D E F Material Color Price
120041269901 Insert foot [120] (120041269901) 12 6 3.7 0.8 2 F1 Nylon-6 (PA-6)

1.5813€

120071669901 Insert foot [120] (120071669901) 16 7 7 1.5 3 F1 Nylon-6 (PA-6)

1.0706€

120131669901 Insert foot [120] (120131669901) 16 7.7 12 0.9 1.5 F1 Nylon-6 (PA-6)

1.4049€

120152169901 Insert foot [120] (120152169901) 21 7.7 15 0.8 4 F1 Nylon-6 (PA-6)

1.7851€

120505069912 Insert foot [120] (120505069912) 14 3.1 5 0.8 1.8 F2 Elastomer

0.6001€

120605069912 Insert foot [120] (120605069912) 25 8.1 5 0.8 1.5 F2 Elastomer

0.7239€

120610069912 Insert foot [120] (120610069912) 21 8.1 6 5 8 F2 Elastomer

0.6558€

120615069912 Insert foot [120] (120615069912) 20 8.1 10 0.8 1.5 F2 Elastomer

0.7239€

120620069913 Insert foot [120] (120620069913) 20 8.1 15 0.8 1.5 F3 Elasomer (40%)+PP (60%)

0.6381€

120625069912 Insert foot [120] (120625069912) 20 8.1 15 0.8 1.5 F2 Elastomer

0.9315€

120630069913 Insert foot [120] (120630069913) 20 8.1 18 0.8 1.5 F3 Elasomer (40%)+PP (60%)

0.7333€