• Made from polyethylene (Ld-PE) (03)
  • Colour: black
  • Locks tightly, especially in thin sheet
  • For protection and covering purposes
Dimensions
A 8
B 0.5
C 1.2
D 12
E 0.6
F 15
Basic info
Material Polyethylene (Ld-PE)
Color black

Colour: Colour number:
black220 XXX XXXX XXXXX

Colour definition : signal black
Matches: Roughly matches RAL colour 9004
Featured colours reserved. Due to the screen differences in colour may occur.
Material:Material number:
Polyethylene (Ld-Pe)03 XXX XXXX XXXXX

Product information
Low density polyethylene is resistant to many chemicals. Therefore especially suitable for coverplugs and caps. Because of great flexibility it is almost unbreakable. Does not take in moisture and therefore very suitable for electrical insulation. Polyethylene can not be glued, burns after lighting it and may discolour and becomes brittle after exposure to direct sunlight.

Physical information
PropertyValueDIN
Relative density (gr/cm³)0.92--
Tensile strength (MN/m²)1053455
Elongation at break (%)30053455
Tensile modulus (MN/m²)18053457
Notched impact strength (kJ/m²)--53453
Ball indentation (MN/m²)1453456
Application temperature (max ºC)70--
Volume resistivity (Ohm.cm)10^1753482
Dissapation factor tan. (10³ Hz)0.000353483
Dielectric strength (MV/m)6053481
Coefficient of friction (on steel) (--)0.17-1.5--
Chemical resistance
Resistant to 
PetrolA
BenzeneA
Mineral oilsA
Vegetable oilsA
Weak alkalisA
Strong alkalisA
Weak acidsA
Strong acidsB

  A = Good
  B = Doubtful
  C = Poor

All information is given in good faith but without warranty


Snap Fit plug [010] (010008022003)

  • Product Code: 010008022003
  • 0.0572€


  • 1000 or more 0.0572€

This product has a minimum quantity of 1000

Discount:

  • from 275€: 10%
  • from 500€: 20%
  • from 1000€: 30%

Price valid until: 31. December, 2024.

Related Products

Part nr. Product name A B C D E F Material Color Price
010010022003 Snap Fit plug [010] (010010022003) 10 0.5 1.2 12 0.8 17 Polyethylene (Ld-PE)

0.0891€